Professional Aluminum Anodizing Pigment Dyes | Yellow 4A | Light to Rich Yellow | Powder Concentrate Makes 7.6 Liters or 2 Gallons

READ SDS SHEET PRIOR TO HANDLING AVOID INHALATION, INGESTION, EYE AND SKIN CONTACT KEEP OUT OF REACH OF CHILDREN Butter Yellow - Yellow 4A is an anodizing dye. Use Butter Yellow only on aluminum. It is not intended for use on any other metals or materials. Butter Yellow - Yellow 4A can change its shade depending on how the thickness of the anodizing surface and the duration of time in the dye bath. It can be a pale grayish yellow if you do a shorter anodizing cycle. For a longer duration in the anodizing bath and in the dye bath, Butter Yellow - Yellow 4A will look like rich, butter yellow. Make sure to seal with our MT-90 Nickel Acetate sealer directly after dye bath. Butter Yellow - Yellow 4A is RoHS compliant. Specs on Butter Yellow - Yellow 4A Concentration:The 80 mL bottle makes 7.6 L (2 gal.) pH - 5.3-6.2 Raise with ammonium hydroxide, lower with acetic acid. Temp: 120-140°F. Light Fastness: 5-6 (Lightfastness describes how resistant the dye is to fading when exposed to UV light. 1-8, 8 being exceptional and long lasting under UV light.) Time: 3-10 minutes depending on saturation preference. Experiment with your metal and techniques to achieve your desired shade.When all procedures are followed carefully, anodizing is environmentally friendly. Anodizing is an electrochemical conversion process. Anodizing changes the outer surface of the aluminum. Anodized aluminum has different characteristics than raw aluminum. Some characteristics of anodized aluminum include durability and weight. (It’s lighter weight than stainless steel but the anodized surface provides a tough surface like steel.) The process of “anodization” creates a thick oxide layer. This thick oxide layer makes it hard, quite scratch resistant and improves its corrosion resistance. It is easier to clean than raw aluminum. Because of its porous nature, anodizing makes it possible to dye the aluminum many colors.

• All instructions and key dye features are labeled on the bottle for easy reference, including a color swatch.
• Packaged in a UV protective bottle to ensure a long and stable shelf-life of unused dye.
• THIS DYE IS SHIPPED IN POWDER FORM TO INCREASE SHELF LIFE. Standard dry shelf life is 5-10 years. TO ACTIVATE COLOR: Open canister. Fill with distilled water to half an inch (12mm) from the opening of the canister. Close canister tightly. Shake well for 30 seconds. Once activated, use product within 1 year.
• Store in a cool, dry location for longevity. Once activated, this 80 mL / 2.7 oz bottle makes 7.6 liters (or 2 gallons) of anodizing dye bath. This dye has very fast uptake and is stable in saturation.
• Dyes are RoSH compliant and made in the USA. Professional anodizing dye with repeatable consistent colors. Create bright, bold colors on anodized aluminum surfaces.